We Ride South DIY Rocker Plate Plans

·

I initially set out to provide the lowest cost, highest value, rocker plates to the masses because (at the time) the highest functioning rocker plates were $1,000+ USD. With inspiration from the Rocker Plates Facebook group I came up with the V1 of the Ride South rocker plate which I released the plans for free. I then started working on a V2 version which I had planned to sell for the low cost of $350 USD.

Fast forward to now and few dozen rocker plates sold and I just do not have the time to support the side project coupled with the fact that multiple “companies” have taken my plans and are now selling them as their own with very little modification. I have decided to just release all of the plans and source files and that is what this webpage is for.

Parts List

In the manner of transparency, the links in the below table are mostly affiliate links where applicable. It costs you nothing to click them and helps me justify making more things to release for free in the future. (also worth noting, these are all parts required for the project and not random crap I am trying to sell you.)

# PARTPART #SIZEQTYAlieBayAmazonGraingerAllied
1Top PlateDIY18mm Birch Plywood1–––––
2Bottom PlateDIY18mm Birch Plywood1–––––
3RisersDIY3mm wood/plexi/delrin4–––––
4Bullseye Level o2H36637mm x 7mm1linklinklink––
5Linear Rod32*720mm x 1400mm (55″)1–linklink––
6Linear BearingSCS20UU/SBR20UU4linklinklink––
7Linear Rod SupportSK204linklinklink––
8Springs121292137mm x 27mm2––link–link
9Top Plate Bolts26LG41M6-1.0 25mm/30mm16–linklink––
10Bottom Plate Bolts6EY59M6-1.0 30mm16–linklink––
11Top Plate Washers29DH69M6 x 128–linklink––
12Bottom Plate Lock Nuts26LJ85M6-1.08–linklink––
13Inflatable Play BallsB07BGV41R75″2–linklink––
14Stage Clamps o2––link––
15Velcro Straps o3––link––
o = Optional

Notes

  • If you decide to go with SCS20UU bearings YOU WILL NEED RISERS.
  • The V3 rocker plate design DOES NOT support SBR20UUs.

Files

PARTSBR20UUSCS20UUMEASUREMENTSPRINTABLES
Top Plate V1Google DriveGoogle DriveSingle / Multi
Bottom Plate V1Google DriveGoogle DriveSingle / Multi
Top Plate V3Google DriveGoogle Drive
Bottom Plate V3Google DriveGoogle Drive
RiserGoogle DriveGoogle Drive

F.A.Q.

  1. Does this rocker plate have fore/aft & side to side movement?
    yes.
  2. What is the difference between SBR20UU and SCS20UU?
    mounting bolt pattern and stack height of bearing.
  3. Will you supply your source files?
    no.

Conversation 150

Comment
  1. Aaron Berlin

    Love the video and instructions. I noticed a bunch of the affiliate links are busted and would love for you to get something from all this work. Do you have new links or recommendations for substitutions?

      1. Michael Reyeros
        Replying to andrew the builderAaron, Thanks! I'm working on converting everything over to this web page (away from the excel sheet…

        Awesome video and instructions, I am also looking to use your build and instructions and would love to see the updated parts list if possible. Trying to see if I am able to get all the required parts here in Miami, FL. Was about to go out and purchase a pre-made rocker plate when I stumbled upon your video. I am of the mindset that if I can build it on the cheap and still get the desired functionality than why not.

  2. I am assuming a 1200mm linear bearing will not work with this design? There is a kit currently listed on Amazon that includes (4) bearings, (2) 20mm x 1200mm linear rods, and (4) linear rod supports for $40.

        1. andrew the builder
          Author of this story
          Replying to PaulI thought it would be an issue, doesn't hurt to check. I've been shopping around for linear rod sinc…

          The hollow rods should work just fine as long as they are hardened. I was actually going to order those when I ran out of the solid linear rod stock I have as it would reduce the shipping weight by quite a bit. I did use washers on the counter sunk holes which are 7.5mm deep. On my latest design I skipped the washers and flat head bolts and used tapered head bolts to avoid using washers.

          Also, if you’re in the DFW I have some 1400mm rods in stock I could sell separate. It probably wouldn’t be cost effective to ship one.

  3. I will look around for some hollow ones, unfortunately I thought they would be cheaper but look to be more expensive. I did find a 20mm x 1500 mm non-hollow rod at Grainger for under $70 but it is not hardened. Everything I am finding else where are sold in pairs so they are about $160/$170 ish. Too bad I am not in in the DFW area, I am up in New England, sourcing a cheap rod may be the sticking point for this build.

    by tapered head bolts, you are using something like this? https://www.amazon.com/M6-1-0-Socket-Screws-Alloy-Steel/dp/B07S51Z6JS/ref=sr_1_6?keywords=m6-1+x+30mm+screw&qid=1679508538&s=industrial&sr=1-6

  4. Bill Halliden

    Hi is there any chance that you could send me the files to my email account please

  5. I’m in Fort Worth and will take you up on the offer for the rod for $40. Please email me.

  6. what is the center line on the V1 top plate? decorative of integral to the design?

  7. Hello Andrew,
    Thank you for making your plan available, this helps so much. I am building your design. I found a local cnc shop that will cut the plates. Can I ask you to email me the files for them to use? Thank you.

  8. Hein Frommann

    Great project and well presented. Thank you for sharing such an awesome idea I Located all the components except the balls. I tried Amazon but could not find that item number
    I will improvise on the top and bottom as no cnc guys around my area

  9. Hi Andrew,
    If I were to use the riser plates, for the SBR20UU bearings, do you know what size bolts I would need to use?

    Thank you

  10. Spencer Heath

    Hey Andrew! I know you’re swamped, but I’m in the DFW area and would love to discuss commissioning one of these from you if you’re able – if not, I’d settle for sourcing one of those rods that seem to be so hard to come by. Please let me know!

  11. Andrew, love this build! I’ve been able to find everything but the compression springs. Your link to the Amazon product shows “Currently Unavailable.” In the video, your part list shows the springs coming from Allied – I don’t know what company/site this is but would love to know if they do still carry them if you can give me their full name and/or website. Thank you, Steve.

  12. Chris Crawford

    Thanks for the tutorial. I found this rail kit on Amazon for just under $50, and it came with everything I needed for the linear rod bearing. The rod is about 4″ shorter than the rod that you listed, but it works perfectly. I kept the second rod as a spare. I did have to make some spacers as you mentioned above.

    VEVOR Linear Rail Slide 2PCs 20mm x 1200mm Linear Bearing Slide Set with 4Pcs Block Bearings SC20UU+4Pcs Shaft Support
    https://www.amazon.com/dp/B0C1SCPP3L

  13. Thanks, this is awesome. Do you know if this fits the wahoo kickr core?

  14. Aaron Danforth

    Hi Andrew,
    This is fantastic! Just dove in and ordered a bunch of parts and found a cnc guy in my area. I have a Kickr Core, so it looks like I need the v2 .dxf files but it looks like the link is broken. Could I get you to send me those? Thanks!

  15. Hi there,

    I was wondering if you had the files for the V2 that would fit the Kickr Core? I have the Core version with the straight support legs.

    Cheers

  16. Thanks for your design. I hope to get one of these set up, but I need to find a local CNC shop. Also, would it be possible for me to edit the design to allow for a 1200 mm rod isntead?

  17. Hey Andrew!
    I really like you project, but I guess it will not work with Elite Drivo I, which I own.
    Is there any chance that you can adjust your project to this trainer?
    Cheers!

  18. I will be using the SCS20UU bearings following your instructions; I will need to use a riser. I can’t find any instructions on how to make or buy these risers. I’m going to forego finding a CNC guy in my area, and I’ll just be doing it myself with the saws/tools I have. Can you please point me to the dimensions I could use?

      1. Christopher Martinez
        Replying to andrew the builderSorry for the delayed response, here is the link for the riser plate: https://drive.google.com/file/…

        How does the riser plate fit with the V3 SCS20UU bearings? I am able to see the plans, just have a hard time conceptualizing, and didn’t see any videos that helped show this. I likely will be doing this without a CNC machine, do you have a good way to see the specific measurements for v3? E.g do you have a specific iOS or computer program to easily view the DXF files?

        1. andrew the builder
          Author of this story
          Replying to Christopher MartinezHow does the riser plate fit with the V3 SCS20UU bearings? I am able to see the plans, just have a h…

          Christopher,
          The risers sandwich between the top of the SC20UU bearings and the top plate, allowing for more clearance in the side to side motion. As far as a good iOS computer program, I am unsure. I modeled it in Windows. I did a quick google for “ios dxf viewer” and a few came up, but not sure if any are good or free.

  19. Hi, my name is Domenico and I’m writing from Italy. Excellent project. If I used springs with 2.5mm wire and 28mm external diameter but only 120mm in length… considering the slight compression I would have to give to stabilize the upper board, would the oscillation be little?
    Otherwise I could use springs with 2mm wire and 28mm diameter with a length of 150mm.
    I don’t know and I would like your suggestion on this hypothesis: If the springs are 120mm, having the wire 2.5mm (instead of 2mm) I would still get good resistance.
    What do you think?
    These are theoretical reasonings also because I haven’t seen your test of your Rocker Plate.
    Hello, thanks and see you soon 😉

    1. Replying to DomenicoHi, my name is Domenico and I'm writing from Italy. Excellent project. If I used springs with 2.5mm…

      Ciao Domenico,

      I come from Italy too and I am very interested in realising this project of Andrew, whom I thank :).
      However, I am having difficulty finding the various parts (I don’t have much experience on this stuff). Could you suggest where you got them, whether online or in some shop (Tecnomat?), and how much did you spend more or less?

      For example, I found this rod:https://www.amazon.it/dp/B0BLKP7D55/ref=twister_B0BLKN7S4C?_encoding=UTF8&th=1
      but it only measures 1000, not 1400 as expected.

      Thank you!

  20. Hey Andrew! It seems that the link to v2 is broken. Is there any place I could find those? Do you know if this design will fit an Elite Direto x?

    Thanks!

    Jan

  21. KEVIN LUCAS

    Andrew,
    Your work is phenomenal and it’s amazingly generous of you to share. Thank you!
    I’m going to dive in. I’ve found most of what I need, but the springs are eluding me. The provided amazon link isn’t available. Do you have a couple you’re willing to sell & mail?

      1. KEVIN LUCAS
        Replying to andrew the buildersure, shoot me an email, anything at andrewgrabbs.com I'll arrange a shipment.

        I realized I could scroll your parts chart to the right, then could see the link for the spring at Allied and was able to purchase them (5 minimum) there. I wasn’t able to delete the comment I’d posted asking you if you had some, due to it waiting on approval, and next comment blocked meanwhile I suppose. Thanks for being willing to ship some. A day’s worth (3 for me) of coffees await you, thanks to Scott Lawson’s suggestion you took. Most of my supplies for a build should arrive soon, decent plywood still on the search menu.

        1. KEVIN LUCAS
          Replying to KEVIN LUCASI realized I could scroll your parts chart to the right, then could see the link for the spring at A…

          And I might finally get to take up the offer of a friend. A couple of years ago I helped him move a large CNC router across the state to his shop, physically level it and set it up, reprogram it after he deleted all its calibrations, figure out how a CNC router works, and choose & set up programs and such for him to use. In turn, he said I could use it anytime I’d like. A two and a half hour drive to visit and play on the machine seems in my future.

  22. Scott A Lawson

    Andrew- if you set-up the “Buy me a coffee” app, I’ll definitely tip you for sharing this with the world. I could’ve figured it out, but you’ve saved me an incredible amount of time and multiple mistakes. FYI- I got several bids for the CNC work- one was for $433 and another was $150. I have no idea what a fair market price on this is but definitely worth shopping around!!!

  23. Hi Andrew,

    Will the V3 be available in Multi printabel?

    Looking forward to start the project for my Wahoo Kickr..

  24. Hey Andrew, great work with the design and thanks for posting.

    I’m currently using a Wahoo Kickr Core and wondering where this is compatible with your design? I’m looking to assemble all the parts together and get building soon.

    Cheers,
    Lee

      1. Lee Hayward
        Replying to andrew the builderThanks Lee! The Kickr Core should work fine with the V3 design.

        Great thanks for the reply Andrew. Would I be right in assuming that V3 is essentially the same as V1 with a wider profile at the rear to accommodate the wider trainers? I’ve bought SCS20UU and proceeded with the V1 design using the multi page template, and now recognise that it isn’t wide enough for the Kickr Core, so perhaps hoping / thinking I can widen the rear of the V1 design to accommodate the Core without too much other modification. I’m planning to use risers in the build.

        Cheers,
        Lee

  25. Hey Andrew,
    Thanks for your excellent designs and video. I’ve bought all the parts (using your links), and am about to start building one. The only CNC place I could find in the area has a $300 minimum, so between that, and the cost of some nice birch ply, I figured I’d just buy this KOM rocker plate: (https://komcycling.com/collections/indoor-accessories/products/rocker-plate-rpv1), and cannibalize the plates from it, as well as the balls. I like the look and the finish, and it saves me some running around. (I will need to router out some channels on the lower plate for the fore/aft ball movement.)
    I do have one question: I have the SCS20UU linear bearings, and they don’t seem to rotate easily on the rod – the linear motion is smooth and fluid, but the rotation around the rod requires some force. Is this expected with new bearings? Will it resolve once I have the leverage from the top plate? The bearings in your video seem to spin around freely – just worried I may have got some defective ones.
    Thanks again for these resources, and for responding to everyone’s questions!
    David

  26. Christopher Martinez

    Have you determined if there would be a weight limit rider and bike. I’m a bigger guy about 275lb with my surley midnight special, and kicker core with axis feet

    1. andrew the builder
      Author of this story
      Replying to Christopher MartinezHave you determined if there would be a weight limit rider and bike. I’m a bigger guy about 275lb wi…

      I have not determined how much weight it can hold; however, the weakest link would be the linear rod bearings. That being said, the kilogram-force of these bearings is pretty high. Here is the chart that outlines the kgf of a single bearing: https://cdn1.bigcommerce.com/n-ou1isn/1mog83/product_images/uploaded_images/linear-bearing-dimensions3.jpg

  27. Hi!
    Really appreciate the drawings, i have sourced all the needed parts and are in the hunt for a CNC-shop to get the plywood cut out.
    One question regarding lengt of the top-plate. I ride a size L Scoot Speedster gravelbike, and its about 145 cm from back of trainer to where i would prefer to strap the front tire. How mutch do i need to lengthen the front of the plate and the holes for the straps, or can i just cut it out without any mods?

    Best regards from Sweden
    Daniel

  28. Michael Elgaard

    Hi Andrew.
    Nice work you have done.
    Do you have access to DGW or DXF files that you want to share, then it is possible to edit the files.

  29. Christopher Martinez

    With the version one plans and using the clamps for the trainer, did you have any issue with clearance with a 6 inch exercise ball and the bolts on the underside of the top bored just wanted to make sure it does not get too close to puncture it. It’s hard to see the angle in your video. it also looks like you just drilled one hole for that bolt and not the two slits for a Velcro strap

    1. andrew the builder
      Author of this story
      Replying to Christopher MartinezWith the version one plans and using the clamps for the trainer, did you have any issue with clearan…

      Christopher,
      I didn’t get the chance to use 6″ balls, but I don’t think they pose that big of an issue assuming they are pliable enough and you can get them wedged in there. I only inflate the balls enough to give them some shape, stick them in and pump them up in place to the desired PSI.

  30. Christopher Martinez

    My other question in regards to spring location between the bearings and your video how you have it shown is this with the appropriate spacing where the screw holes are on the top plate?

  31. Brian Anderson

    Hi Andrew is there still an available source for springs and balls for your rocker plate design. I’m in the process of building one and having trouble sourcing the springs and balls.

    Brian

  32. I can’t seem to source a 5×5 piece of plywood in my area. Do you think this could be done on two 4×4 boards if placed diagonally?

  33. Patrick White

    Can I ask why on V3 files the top plate is in imperial and the bottom plate is in metric. If I just scale the imperial up 25.4 will that be accurate enough?

  34. Patrick White

    Hello Andrew,
    Where do the springs go on V3? It looks to me between the 2nd & 3rd Linear Rod Supports & Linear Bearings. I have my vectors drawn in Aspire for toolpaths and hardware locations. Is there a way I can share that with you. The Dimension between the 2nd & 3rd Linear Rod Supports & Linear Bearings is 3.625 +/- which would compress 5 1/4″ spring 1 5/8″ which is more then 1/2″ you motioned in your video. Something seem of to me.

  35. Patrick White

    Andrew
    Yes I have the springs. But my question is the compression of the 5 1/4″ spring to 3 5/8″.
    Does that give your desired motion and is it fairly stiff?

  36. Hi Andrew,
    Mate I’ve converted the Scs20uu v3 to pdf then scaled to 525% it seems like the holes align well enough. Just checking to see if you know before I start cutting

  37. I was having troubles to find a suitable ball for this design. In Europe the recommended rubber balls don’t seem to be available. I tried 3 different small size balls from Decathlon and the best in terms of size, size consistency, keeping air and robustness appears to be the “ATORKA HB500B Size 1 Beach Handball – Yellow”.

    It is about 15cm / 6″ in diameter, 250g, a more robust and thicker walled ball, but I still managed to get it slide into the bottom slot and seems to be working well. I don’t have long term experience with it.

  38. Noe Espinosa

    I have a newer model Wahoo Kickr that I’m planning to bolt directly into the top plate using longer bolts like you mentioned in the video. Do you have specifics on length and size?

  39. What bit[s] do you use for the CNC? Do you use a roundover for the outside edge & handles? Thank you!

  40. Yuriy Havryliv

    Hi Andrew, many thanks for the blueprints and videos. I have just completed my rocker plate. It’s an awesome build and first ride was great

    Thanks again

  41. Hey Andrew!
    Random Questions….. I’ve been using my V1 based on your design for ~2 trainer seasons but I had a few questions.

    I placed my Springs as you had in the initial V1 Videos….. ie: (counting from the front of the board) with a spring behind the 2nd Linear Road support and just before the last (4th) linear road support.
    I had two concerns:
    – The bottom plate sticks out ~10cm in front of the top plate when mounted this way….is that normal?
    – I occasionally get ‘sticking’ in when the top plate slides forward…..

    I tried to correct both issues by moving the back spring forward, to the location shown in your 3-Image at the top of this page….Interestingly, that made the Top and bottom plates line up (the way I assume you’d intended), but now I get contact between the linear bearing and the rod support (mostly when standing up – presumably the affect of ‘throwing’ the bike backwards).

    Is there anything that changed Re: the rod support spacing or your recommended Spring placement?

    Thanks!

    1. andrew the builder
      Author of this story
      Replying to AndrewHey Andrew! Random Questions..... I've been using my V1 based on your design for ~2 trainer seasons…

      Sorry to hear about the issues!

      Depending on how you made your top plate, there should be two linear bearings between two stand offs. There should be a spring between each bearing and it’s immediate stand off. This should “self center” the top and bottom plates. The sticking you are referring to makes me thing you don’t have enough clearance between your linear rod stand off and your top plate. This can be achieved with a few mm of spacers between the top plate and then linear bearings.

  42. Hi Andrew. Thanks for this. I’m currently adapting your DXF to custom fit my bike and HubOne trainer. I did note that in the video that shows you riding, the compression springs are in a different position than in the video showing the assembly. The latter shows one spring at the back and the other in the middle section. On the DXF, the distance between the mount and first bearing (back end) is greater than the length of the spring so there would be no pre compression. Obviously, it’s easy to adjust the design to suit but which is the best option in terms of spring placement? Thanks again. Tim (UK)

    1. andrew the builder
      Author of this story
      Replying to Tim DeakinHi Andrew. Thanks for this. I'm currently adapting your DXF to custom fit my bike and HubOne trainer…

      That is correct, in the video there the rocker plate is a very early prototype. To reduce the materials needs and to have the two plates self center, I scrapped that design and placed the two inner bearings the same distance from each of their rod supports. This should create the pre-load on the springs.

      |SB–BS|
      | = stand off
      S = spring
      B = bearing.

  43. Brian Anderson

    Andrew, will a 2020 Kickr fit on the V1 version of your design?

    Brian

  44. V3
    There seems to be a problem with the scale in these files. One element measures 581,201 x 1524 mm, while the other is only 31,624 x 59,865 mm.
    What are the correct sizes?

  45. shouldn’t
    10 Bottom Plate Bolts 6EY59 M6-1.0 30mm 16
    be 8pcs instead of 16?

  46. Patrick White

    Hello Andrew,
    I just machined one of these on the CNC. I found when assembling that I needed to put a 1/8 spacer on top of the linear bearing in order for the top plate to rock with out hitting the 20mm rod mounts.

  47. Patrick White

    Andrew,
    Sorry I missed the note about the risers. That is exactly what I did. Thanks

  48. Hey Andrew,

    I asked a friend if he could CNC the plates for me. Unfortunately, he said he couldn’t because the files are in imperial measurements instead of metric. Could you provide files with metric measurements?

  49. Andrew, thanks for sharing this! Quick question, do you know if the top and bottom plates will fit on a 4 x 8 sheet? I know you said they fit on a 5 x 5 sheet side by side, so I’m thinking they would fit on a 4 x 8 more like you have them stacked in your dxf file video but want to confirm. Thank you!

  50. Andrew, the local printshops are all telling me the single printable is a small image – 3 x 7 inches & 4 x 8 inches. How to I get the files to by the right size to print for the top and bottom boards? Thanks for everything here, so close to getting the rocker board up and running.

  51. Hi,
    Firstly, thank you for all the knowledge you are willingly sharing amongst the cyclo-selfbuild-enthousiasts! Thumbs up!
    With regards to availability, I will be using slightly different types of rod supports and bearings. I have two questions connected with it;
    1. What should be the space between the upper and lower plate? I would like to buy also the correct sized balls.
    2. How much does the upper plate tilt in reality? Or let me put it this way – how much clearance (angle) for tilting should it have? I will need to order custom risers, but I would like to calculate the correct size.
    Many thanks and keep up the good work!

  52. Matthew Adams

    Hi Andrew – firstly, thanks so much for the awesome videos & plans!

    I’ve ordered the bearings, and plan on building the two plates soon – but first thought I’d check on which version of the WeRideSouth rocker plate I should build for my bike + trainer. I have ordered SCS20UUs and SK20s, and will source a 1400mm rod here in New Zealand.

    I have a Wahoo Kickr v1 (<2016), and the contact patch of my trainer bike's front tyre (ie where the front tyre will sit on the top plate) is 155cm from the rear-most part of the trainer.

    Matthew

  53. Hello Andrew, congratulations for providing all the information on this channel.
    I’m not good at interpreting plans and in the printables (simple) there are some measurements that I can’t find.

    Your help is possible? Thank you

  54. Andrew what is the width of the plates
    the dimensions are cut off in the files you provided
    thx in advance

  55. Art Tawatari

    Hi Andrew,
    Thanks for sharing your excellent plans. I’m going to try and make the rocker without the CNC. I do not see anywhere in your plans what the width of the top and bottom plate are. Could you give me those dimensions at their widest point. Thank you. Art

  56. I’m about to tackle the plate build, but had a quick question first if that’s ok? I have a Wahoo BIKE V1 (the whole trainer bike). Are you aware of anyone using this with your rocker plate? Success? Fantastic! Mat

  57. Hi Andrew,

    Do you have plans for the top and bottom plates with dimensions?

    I would be willing to pay for them.

    Thanks

  58. Hi Andrew,

    Thanks for all the information an links to the different sites for all the parts.

    Next are the base and top plate. Like one of the other visitors also mentioned, do you have a plan with the measurements on it?

  59. Daniel Schumacher

    I really like your design. However, the issue I am having is that your design doesn’t really work with the TACX Neo since the trainer is hanging off the back. I also want to extend the front by 6 inches to get the riser fully on the rocker base, which requires adding a 5th bearing set up forward.

    Since I don’t have the cad skills or the software to make the adjustment, would you consider selling a file which is just the center line and the bolt holes for the top and bottom sheets. Then the CNC guy can properly line up the bolts for me, and I can make the rest of the top and bottom by hand.

  60. Hello Andrew!
    First and foremost, thank you very much for sharing this project with all of us!

    I watched your video and you seem to have 2 similar shaped plates, nevertheless either V3 and V4 have different top and bottom shaped plates.
    I understand the hollow parts can be for lightening the overall rocker plate, but it’s somewhat odd that they arent identical. V4 differs around 22 cm in width, is there a particular reason for this?

    Also, I assume that top plate measurements are in inches by default and the bottom are in mm, eventhough total length is 7 cm different between one another.

    Would you be so kind in clarifiying us on this questions?

    Thanks!

  61. I love this the only thing i really miss i measurements i cannot find anything in that dxf reader files etc 🙁
    Otherwise really nice

  62. steve altman

    I’m planning to build this with a completely free front wheel. This will allow for a shorter rod and mechanism. I’ll send it to you when its done. BTW, I was wondering how wide the top plate is.

    Br,

    Steve

  63. Hi Andrew – greetings from Sydney Australia! Thanks so much for sharing these plans! I’ve just put mine together and works absolutely perfectly (quite apart from it being fun to make). Like everyone else here, I’m very appreciative. Thanks again

  64. Hi, wondering if you have a file that the Kickr Core 2 will fit on?
    Thanks for the help and for all of the resources you’ve helped everyone with.

    Cheers,

  65. Hi Andrew, do you have any plans for a Kickr Core 2? Thanks so much for your great videos and guides! Best regards from Germany, Michael

Join the conversation

Your email address will not be published. Required fields are marked *